Hear Different.
 


Custom Installation Product Range

HiVi Custom: A Competitive Edge

Staying competitive requires being one step ahead of the game. In addition to proven sound quality HiVi Custom Install products provide the installer with competitive advantages that are simple and dependable. We offer easy and direct access to complete lines of quality custom install and home theater products designed to meet a broad range of markets and applications. Audiophile sound at prices that provide real advantages in competitiveness.

Our two lines of in-wall and in-ceiling products each include several distinct models. In addition to architectural speakers we carry indoor/outdoor speakers, subwoofers, home theater systems and accessories well-suited to the quality-minded custom professional.

Design. Build. Inspire.

VX Series

Directional Silk Dome Tweeters - The silk dome tweeters allow for a 30-degree tilt with full rotation swivel. This provides the installer or listener with the ability to tailor and optimize performance to focus on the intended listening area.

Skillfully Engineered Crossovers Each speaker features crossovers that blend the sound spectrum seamlessly with skillfully engineered 6, 12, 18db networks. The tweeters midranges also feature Polymide auto reset switch technology for high power protection. This will insure that that the tweeters and are never damaged in case of overpower.

Durable Construction All speakers are designed for excellent performance in a full range of indoor listening environments with PP Plastics, large wire gauges for better transfer of signal, stainless steel hardware and rust-roof aluminum grilles. This will ensure many years of listening enjoyment.


VX6-C

6.5” 2-way In-Ceiling Speaker
Woofer: 6.5”
PP cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 45Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-60 watts
Impedance: 8 ohm
Cut Out size: 205mm

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK

 



VX8-C

8” 2-way In-Ceiling Speaker 
Woofer: 8” 
PP cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece 
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective reset switch for tweeter 
Frequency Response: 40Hz- 20KHz 
Sensitivity: 87dB 
Recommended amplifier power: 10-125 watts 
Impedance: 8 ohm 
Cut Out size: 250mm 

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK

 


VX10-SW

10” In-Ceiling SubWoofer
Woofer: 10”
PP cone, rubber surround, 33oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Frequency Response: 23Hz- 500Hz
Sensitivity: 84dB
Recommended amplifier power: 10-200 watts
Impedance: 8 ohm
Cut Out size: 311mm

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK

VR Series

Attenuation Switches The VR Line features 3dB attenuation for woofers and tweeters. Switches are located on the front baffle of all speakers, and allow the installer or end-user to fine tune speaker output levels to match room designs, specific applications or individual listening preferences.

Adjustable Impedance The 4 ohm, 8 ohm jumper located on the PCB provides the installer increased flexibility in matching power output and impedance levels to optimize a systems performance.

Nomex “Stratum” Cones The VR Series uses a layered Nomex “Stratum” cones for smooth and responsive lower end frequencies. The “Stratum” cone is layered with honeycomb shaped Nomex fibers between tightly woven fiberglass. This structure provides stiffness, strength and durability. This composite cone lets the woofer section play more defined bass, and produces a refined midrange to bring a cleaner, clearer warmer listening experience.

Infused Silk Tweeters - The silk tweeters are infused with bonding resins which add strength and moisture resistance while allowing for smoother frequency response output for the tweeter. The VR Series tweeters are able to handle more power and image more consistently than most soft dome tweeters. Tweeters allow for a 30-degree tilt with full rotation swivel, allowing tailored and optimized performance to match any room design.

Skillfully Engineered Crossovers Each speaker features crossovers that blend the sound spectrum seamlessly with skillfully engineered 6, 12, 18 and 24db networks. The tweeters midranges also feature Polymide auto reset switch technology for high power protection. This will insure that that the tweeters and are never damaged in case of overpower.

Durable Construction All speakers are designed for excellent performance in a full range of indoor listening environments with PP Plastics, large wire gauges for better transfer of signal, stainless steel hardware and rust-roof aluminum grilles. This will ensure many years of listening enjoyment.

Swan VR5-C

VR5-C

5.25” 2-way In-Ceiling Speaker
Woofer: 5.25”
Nomex "Stratum" cone, rubber surround, 12oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 50Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
Cut Out size: 185mm

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK

 


VR6-C

6.5” 2-way In-Ceiling Speaker
Woofer: 6.5”
Nomex “Stratum” cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 45Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-100 watts
Impedance: 8 ohm
Cut Out size: 205mm

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK


VR8-C

8” 2-way In-Ceiling Speaker
Woofer: 8”
Nomex “Stratum” cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective reset switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-120 watts
Impedance: 8 ohm
Cut Out size: 250mm

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK

bar

vr6sc
vr6sc

VR6-SC

6.5” 2-way Stereo In-Ceiling Speaker
Woofer: 6.5” Nomex “Stratum” cone, rubber surround, 18.5oz magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeters: Dual 0.8" Silk domes, Ferro-fluid cooled, Neodymium magnet, wide dispersion.
Crossover: Phonalic PCB board, 12dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeters
Frequency Response: 40Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-60 watts per channel
Impedance: 8 ohm
Cut Out Size: 8.07"

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK


VR8-SC

8” 2-way Stereo In-Ceiling Speaker
Woofer: 8” Nomex “Stratum” cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk domes, Ferro-fluid cooled, Neodymium magnets, wide dispersion
Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, polymide auto protective switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-120 watts per channel
Impedance: 8 ohm
Cut Out Size: 250mm

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK

bar

vr6w
vr6w

VR6-W

6.5” 2-way In-Wall Speaker
Woofer: 6.5”
Nomex “Stratum” cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion
Crossover:
Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 45Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-100 watts
Impedance: 8ohm
Cut Out size: 276mm X 189mm

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK

bar

vr8w
vr8w

VR8-W

8” 2-way In-Wall Speaker
Woofer: 8”
Nomex “Stratum” cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-120 watts
Impedance: 8 ohm
Cut Out size: 326mm X 223mm

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK


VR5-LCR

5.25” In-Wall Video Shielded Left, Center or Right Channel Speaker
Woofer: 5.25”
Nomex “Stratum” cone, rubber surround, 12.3oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees,1" silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, polymide auto protective switch for tweeter
Frequency Response: 50Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
Cut Out Size: 416mm X 188mm

SHIPPED WITH ALUMINIUM GRILLES, CUTOUT TEMPLATE, GRILLE CLIP AND PAINT MASK